ACTIVIDAD 12.- Verifying IPV6 and IPV4

En esta actividad realizamos lo siguiente:

Part 1:     Complete the Addressing Table Documentation

Step 1:     Use ipconfig to verify IPv4 addressing.

a.     Click PC1 and click the Desktop tab > Command Prompt.

b.    Enter the ipconfig /all command to collect the IPv4 information. Fill in the Addressing Table with the IPv4 address, subnet mask, and default gateway.

c.     Click PC2 and click the Desktop tab > Command Prompt.

d.    Enter the ipconfig /all command to collect the IPv4 information. Fill in the Addressing Table with the IPv4 address, subnet mask, and default gateway.

Step 2:     Use ipv6config to verify IPv6 addressing.

a.     On PC1, enter the ipv6config /all command to collect the IPv6 information. Fill in the Addressing Table with the IPv6 address, subnet prefix, and default gateway.

b.    On PC2, enter the ipv6config /all command to collect the IPv6 information. Fill in the Addressing Table with the IPv6 address, subnet prefix, and default gateway.

Part 3:     Discover the Path by Tracing the Route

Step 1:     Use tracert to discover the IPv4 path.

a.     From PC1, trace the route to PC2.

PC> tracert 10.10.1.20

Step 2:     Use tracert to discover the IPv6 path.

a.     From PC1, trace the route to the IPv6 address for PC2.

PC> tracert 2001:DB8:1:4::A